pvdossel
17-12-01, 08:53
Geforce2 users....
Should you not be satified with the frame-rates running TR1 & UB on Glidos (of course in highest resolution).
AFTER YOU STARTED THE GLIDOS PROGRAM Use the below batch file (courtesy Dracman)to start the games, and do NOT start over the normal buttons in the Glidos interface.
Do not bother about TR1 only DISPLAYING 30 FPS..this is merely a restriction of the display. The actual framerates are higher.
set SST_GRXCLK=200
set SSTH3_GRXCLK=200
set SST_FT_CLK_DEL=0x4
set SST_TF0_CLK_DEL=0x6
set SST_TF1_CLK_DEL=0x6
set SST_VIN_CLKDEL=0x1
set SST_VOUT_CLKDEL=0x0
set SST_TMUMEM_SIZE=2
SET SST_SCREENREFRESH=85
SET SST_FASTMEM=1
SET SST_FASTPCIRD=1
SET SST_FASTMEM=1
SET SST_FASTPCIRD=1
SET SST_RGAMMA=0.90
SET SST_GGAMMA=0.90
SET SST_BGAMMA=0.90
rem SET SSTH3_REFRESH_512x384=85
SET SSTH3_REFRESH_640x400=85
SET SSTH3_REFRESH_640x480=85
SET SSTH3_REFRESH_800x600=85
SET SSTH3_REFRESH_1024x768=85
SET FX_GLIDE_LOD_DITHER=0
SET FX_GLIDE_ALLOC_COLOR=3
set SST_ANTIALIAS=1
set SSTH3_SLIDETECT=0
rem pause
tomb.exe
Of course for UB, you'll have to use the 3Dfx version of tombub.exe.
I personally set SST_ANTIALIAS=1 to get rid of these jagged edges.....
If you want you can set is to 0.
Should you not be satified with the frame-rates running TR1 & UB on Glidos (of course in highest resolution).
AFTER YOU STARTED THE GLIDOS PROGRAM Use the below batch file (courtesy Dracman)to start the games, and do NOT start over the normal buttons in the Glidos interface.
Do not bother about TR1 only DISPLAYING 30 FPS..this is merely a restriction of the display. The actual framerates are higher.
set SST_GRXCLK=200
set SSTH3_GRXCLK=200
set SST_FT_CLK_DEL=0x4
set SST_TF0_CLK_DEL=0x6
set SST_TF1_CLK_DEL=0x6
set SST_VIN_CLKDEL=0x1
set SST_VOUT_CLKDEL=0x0
set SST_TMUMEM_SIZE=2
SET SST_SCREENREFRESH=85
SET SST_FASTMEM=1
SET SST_FASTPCIRD=1
SET SST_FASTMEM=1
SET SST_FASTPCIRD=1
SET SST_RGAMMA=0.90
SET SST_GGAMMA=0.90
SET SST_BGAMMA=0.90
rem SET SSTH3_REFRESH_512x384=85
SET SSTH3_REFRESH_640x400=85
SET SSTH3_REFRESH_640x480=85
SET SSTH3_REFRESH_800x600=85
SET SSTH3_REFRESH_1024x768=85
SET FX_GLIDE_LOD_DITHER=0
SET FX_GLIDE_ALLOC_COLOR=3
set SST_ANTIALIAS=1
set SSTH3_SLIDETECT=0
rem pause
tomb.exe
Of course for UB, you'll have to use the 3Dfx version of tombub.exe.
I personally set SST_ANTIALIAS=1 to get rid of these jagged edges.....
If you want you can set is to 0.