www.tombraiderforums.com

Go Back   www.tombraiderforums.com > Tomb Raider Modding > Tomb Raider Level Editor > Tomb Raider Level Editor Tutorials

Closed Thread
 
Thread Tools
Old 18-08-15, 09:25   #1
AkyV
Moderator
 
Join Date: Dec 2011
Location: Hungary
Posts: 2,376
Default Level Jumps - the Basics

by Uvavoo


1. In level 1. Set a trigger where you want the jump to occur.

2. Set the trigger type to FINISH to the right of this type in a 2 (because this is the level you want to jump to).

3. Put the number 1 in the TIMER field.

4. Place a Lara start position nullmesh in the square BEFORE the trigger.

5. Open the OCB for the Lara start position nullmesh. Put a 1 in the box, press enter and OK that. This is where Lara will appear when she jumps back from level 2.

6. In level 2. Again set a trigger to jump back.

7. Set the trigger type to FINISH and put a 1 in the box this time.

8. Put the number 1 in the TIMER.

9. Place a Lara start position nullmesh in the square before the trigger again.

10. Again open the OCB and type a 1.



Things to remember

* Lara needs to be present in both levels. (can be anywhere in the level)

* You can have more than 1 'jump' in a level. If you do, the TIMER fields need to be changed to 2 or more in both levels. The OCB of the lara start position needs also to be changed to 2 or more in both levels.

* The fat end of the nullmesh points to the direction Lara will be facing when she appears in the new level.
AkyV is offline  
Closed Thread

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT. The time now is 03:19.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2017, vBulletin Solutions Inc.